3, Functional description of each part:
1. Traction Department:
1. The traction roller is driven by a 7.5KW servo motor.
2. Waste edge recycling device:
Use a fan to blow out the waste and waste materials, and the customer will equip a mesh box for collection.
3. Winding mechanism: (The left or right end of the finished product is determined by the customer when placing an order)
1. The cut material is independently wound using both upper and lower axes, and the slitting knife uses a circular knife for slitting (6 pairs)
2. The upper and lower winding shafts each have one 7.5KW servo motor with pneumatic expansion shaft. The winding tension is automatically controlled by Siemens PLC based on the current coil diameter, ensuring that the finished material is neat when multiple slits are cut. All coil end faces are flat, and the flatness of the disc surface is freely selected by the pneumatic pressure roller and the self weight pressure roller for cutting. The tightness of the inner and outer layers of the finished coil is controllable, which is a spiral winding method. As the winding diameter continues to increase, the PLC automatically controls the speed of the winding servo motor to decrease.
5. Discharge device
Adopting a connected shaftless hydraulic automatic feeding structure
(1) 1 set of German BST simulation correction motor
(2) Guide rail 25 model 4 pieces
(3) One pair of high-quality steel is used for the 40 thick memorial archway
(4) 1 pair of lifting swing arms
(5) Cylinder 140X63 1 pair
(6) The discharge brake adopts one pair of air brakes
Electrical equipment adopts
Chint Group is used as low-voltage apparatus, Snyder is used as button switch, Siemens is used as PLC to control the operating system of the whole machine
4, Machine Part Location
